当宁消防网
1.The MCP is mounted inside the wall.Unplug the point,put cables into the base's entrancehole and connect corresponding terminals.
2.Wiring instructions:BS,AS and BP,AP:two bus inputs of non-polarized signals.
•Plug-in structure.Simple and convenient installation
•Alarm by pressing,reset by a special key
•Non-polarized two-wire to the control panel
•Reusable
| Operating voltage | Loop 24V(18.5V~26V) |
| Operating current | Standby current:≤0.2mA; Alarm current:≤0.8mA Temperature:-10℃~+55℃; Relative Humidity:≤95% non-condensing |
| Coding method | Electronically coding |
| Code range | 1~255 |
| Material and color of enclosure | ABS;Red |
| Weight | About 120g(with base) |
| Mounting hole distance | 60mm |
| Dimension(L×W×H) | 95mm×44mm×95mm(with base) |
相关商品
全部评论
写评论
